Oil & Gas Glossary 1.0

The large wrenches used to make up or break out drill pipe, casing, tubing, or other pipe; variously called casing tongs, pipe tongs, and so forth, according to the specific use. Power tongs are pneumatically or hydraulically operated tools that serve to spin the pipe up tight and, in some instances, to apply the final makeup torque.

tongs that are actuated by air or hydraulic fluid and are used for making up or breaking out sucker rods

Mechanical tongs; sometimes used generically for all brands of tongs.

Large wrench used for turning when making up or breaking out casing. See tongs.

A Y-shaped chain used to spin up (tighten) one joint of drill pipe into another. One end of the chain is attached to the tongs, another end to the spinning cathead, and the third end left free. The free end is wrapped around the tool joint, and the cathead pulls the chain off the joint, causing the joint to spin rapidly and tighten up. After the free end of the chain is pulled off the joint, the tongs are secured in the spot vacated by the chain and continued pull on the chain (and thus on the tongs) by the cathead makes up the joint to final tightness.

Pipe tongs that grip the pipe with a chisel-like insert in the jaw of the wrench.

A hand tool consisting of a handle and chain that resembles the chain on a bicycle. In general, chain tongs are used for turning pipe or fittings of a diameter larger than that which a pipe wrench would fit. The chain is looped and tightened around the pipe or fitting, and the handle is used to turn the tool so that the pipe or fitting can be tightened or loosened.

Large wrenches used to break out and make up tubing. They may be operated manually, hydraulically, or pneumatically.