Oil & Gas Glossary 1.0

HomeContact UsNovember 21, 2008
With 2000+ technical terms!

OIL & GAS TECHNICAL TERMS GLOSSARY

If you are looking for a definition of any technical terms in oil & gas field, then this site is yours.

Until now, we've collected around 2000 technical terms, but if this still not enough, and you've found any term that is not in our database, please contact us, and we will happily find it for you, or you can just check it again later, because every unsuccessful search will be recorded by our system for later update.

Thanks and happy searching ^^.

Search Result for Impermeable

impermeable

Preventing the passage of fluid. A formation may be porous yet impermeable if there is an absence of connecting passages between the voids within it. See permeability.

caprock

2. impermeable rock overlying an oil or gas reservoir that tends to prevent migration of oil or gas out of the reservoir.

permeability (of a reservoir rock)

The ability of a rock to transmit fluid through the pore spaces. - A key influence on the rate of flow, movement and drainage of the fluids. There is no necessary relation between porosity and permeability. A rock may be highly porous and yet impermeable if there is no communication between pores. A highly porous sand is usually highly permeable. A measure of the ease with which a fluid flows through the connecting pore spaces of rock or cement. The unit of measurement is the millidarcy. Fluid conductivity of a porous medium. Ability of a fluid to flow within the interconnected pore network of a porous medium.

differential sticking

A condition in which the drill stem becomes stuck against the wall of the wellbore because part of the drill stem (usually the drill collars) has become embedded in the filter cake. necessary conditions for differential-pressure sticking, or wall sticking, are a permeable formation and a pressure differential across a nearly impermeable filter cake and drill stem. Also called wall sticking. See differential pressure, filter cake.

reservoir

A porous and permeable underground formation containing an individual and separate natural accumulation of producible hydrocarbons (oil and/or gas) which is confined by impermeable rock or water barriers and is characterized by a single natural pressure system. A subsurface, porous, permeable rock body in which oil and/or gas is stored, Most reservoir rocks are limestones, dolomites, sandstones, or a combination of these. The three basic types of hydrocarbon reservoirs are oil, gas, and condensate. An oil reservoir generally contains three fluids - gas, oil, and water - with oil the dominant product. In the typical oil reservoir, these fluids occur in different phases because of the variance in their gravities. Gas, the lightest, occupies the upper part of the reservoir rocks; water, the lower part; and oil, the intermediate section. In addition to its occurrence as a cap or in solution, gas may accumulate independently of the oil; if so, the reservoir is called a gas reservoir. Associated with the gas, in most instances, are salt water and some oil. In a condensate reservoir, the hydrocarbons may exist as a gas, but, when brought to the surface, some of the heavier ones condense to a liquid.

Popular Oil & Gas Terms