Oil & Gas Glossary 1.0

2. the layer of concentrated solids from the drilling mud or cement slurry that forms on the walls of the borehole opposite permeable formations; also call wall cake or mud cake.

The character or state of the drilling mud filter cake. From API RP 13B: notations such as "hard," "soft," "tough," rubbery," and "firm" may be used to convey some idea of cake consistency.

Also called filter cake or mud cake. See filter cake.

1. compacted solid or semisolid material remaining on a filter after pressure filtration of mud with a standard filter press. Thickness of the cake is reported in thirty-seconds of an inch or in millimeters.

See filter cake.

A measurement of the solids deposited on filter paper in thirty-seconds of an inch during standard 30-min API filter test. See cake thickness. In certain areas the filter cake thickness is a measurement of the solids deposited on filter paper for 7-1/2-min.

The thickness of drilling mud filter cake

A device that is fastened to the outside of casing to remove mud cake from the wall of a hole to condition the hole for cementing. By rotating or moving the casing string up and down as it is being run into the hole, the scratcher, formed of stiff wire, removes the cake so that the cement can bond solidly to the formation.

A condition in which the drill stem becomes stuck against the wall of the wellbore because part of the drill stem (usually the drill collars) has become embedded in the filter cake. necessary conditions for differential-pressure sticking, or wall sticking, are a permeable formation and a pressure differential across a nearly impermeable filter cake and drill stem. Also called wall sticking. See differential pressure, filter cake.

1. to seal the hole against formation fluids by allowing the buildup of wall cake.

A mixture of hydrochloric and hydrofluoric acids and surfactants used to remove wall cake from the wellbore.

The electrokinetic portion of the spontaneous potential electric-log curve that can be influenced significantly by the characteristics of the filtrate and mud cake or the drilling fluid that was used to drill the well.

The flux of fluids and solids that occurs in the initial stages of any filtration before pore openings are bridged and a filter cake is formed. Also called spurt loss.

Semisolid or solid complex, amorphous mixture of organic compounds having no definite melting point or tendency to crystallize. Resins may be a component of compounded materials that can be added to drilling fluids to impart special properties to the system, to wall cake, etc.

The filtration characteristics of a drilling mud. In general, these qualities are inverse to the thickness of the filter cake deposited on the face of a porous medium and the amount of filtrate allowed to escape from the drilling fluid into or through the medium.

The liquid circulated through the wellbore during rotary drilling and workover operations. In addition to its function of bringing cuttings to the surface, drilling mud cools and lubricates the bit and drill stem, protects against blowouts by holding back subsurface pressures, and deposits a mud cake on the wall of the borehole to prevent loss of fluids to the formation. See drilling fluid.