Oil & Gas Glossary 1.0
OIL & GAS TECHNICAL TERMS GLOSSARY
If you are looking for a definition of any technical terms in oil & gas field, then this site is yours.
Until now, we've collected around 2000 technical terms, but if this still not enough, and you've found any term that is not in our database, please contact us, and we will happily find it for you, or you can just check it again later, because every unsuccessful search will be recorded by our system for later update.
Thanks and happy searching ^^.
Search Result for Surfactant Mud
surfactant mud
A drilling mud prepared by adding a surfactant to a water-base mud to change the colloidal state of the clay from that of complete dispersion to one of controlled flocculation. Such muds were originally designed for use in deep, high-temperature wells, but their many advantages (high chemical and thermal stability, minimum swelling effect on clay-bearing zones, lower plastic viscosity, and so on) extend their applicability.
surfactant
A soluble compound that concentrates on the surface boundary between two substances such as oil and water and reduces the surface tension between the substances. The use of surfactants permits the thorough surface contact or mixing of substances that ordinarily remain separate. Surfactants are used in the petroleum industry as additives to drilling mud and to water during chemical flooding. See micellar-polymer flooding; surfactant mud
surface-active agent
See surfactant.
micelle
A round cluster of hydrocarbon chains formed when the amount of surfactant in an aqueous solution reaches a critical point. The micelles are able to surround and dissolve droplets of water or oil, forming an emulsion.
micellar-polymer flooding
A method of improved oil recovery in which chemicals dissolved in water are pumped into a reservoir through injection wells to mobilize off left behind after primary or secondary recovery and to move it toward production wells. The chemical solution includes surfactants or surfactant-forming chemicals that reduce the interfacial and capillary forces between oil and water, releasing the oil and carrying it out of the pores where it has been trapped. The solution may also contain cosurfactants to match the viscosity of the solution to that of the oil to stabilize the solution and to prevent its absorption by reservoir rock. An electrolyte is often added to aid in adjusting viscosity. Injection of the chemical solution is followed by a slug of water thickened with a polymer, which pushes the released oil through the reservoir, decreases the effective permeability of established channels so that new channels are opened, and serves as a mobility buffer between the chemical solution and the final injection of water.