Oil & Gas Glossary 1.0

2. an electricity storage device.

Gas that is stored in an underground reservoir.

The surface pipes through which oil travels from the well to storage.

The surface pipe through which oil travels from a well to processing equipment or to storage.

The foundation on which the derrick or mast and usually the drawworks sit. It contains space for storage and well-control equipment.

A lease storage tank to which produced oil is run.

An open pit dug in the ground to hold drilling fluid or waste materials discarded after the treatment of drilling mud. For some drilling operations, mud pits are used for suction to the mud pumps, settling of mud sediments, and storage of reserve mud. Steel tanks are much more commonly used for these purposes now, but they are still sometimes referred to as pits.

The percentage that the volume of the pore space bears to the total bulk volume. The pore space determines the amount of space available for storage of fluids.

A device that prevents leakage along a piston, rod, propeller shaft, or other moving part that passes through a hole in a cylinder or vessel. It consists of a box or chamber made by enlarging the hole and a gland containing compressed packing. On a well being artificially lifted by means of a sucker rod pump, the polished rod operates through a stuffing box, preventing escape of oil and diverting it into a side outlet to which is connected the flow line leading to the oil and gas separator or to the field storage tank. For a bottomhole pressure test, the wireline goes through a stuffing box and lubricator, allowing the gauge to be raised and lowered against well pressure. The lubricator provides a pressure-tight grease seal in the stuffing box.

A floating offshore drilling unit that has pontoons and columns that when flooded cause the unit to submerge in the water to a predetermined depth. Living quarters, storage space, and so forth a reassembled on the deck. Semisubmersible rigs are either self-propelled or towed to a drilling site and either anchored or dynamically positioned over the site, or both. In shallow water, some semisubmersibles can be ballasted to rest on the seabed. Semisubmersibles are more stable than drill ships and ship-shaped barges and are used extensively to drill wildcat wells in rough waters such as the North Sea. Two types of semisubmersible rigs are the bottle-type semisubmersible and the column-stabilized semisubmersible. See floating offshore drilling rig.